Taking too long? Close loading screen.
Connect with us

Science

Evaluating scenarios toward zero plastic pollution

Published

on

A mess of plastic

It is not clear what strategies will be most effective in mitigating harm from the global problem of plastic pollution. Borrelle et al. and Lau et al. discuss possible solutions and their impacts. Both groups found that substantial reductions in plastic-waste generation can be made in the coming decades with immediate, concerted, and vigorous action, but even in the best case scenario, huge quantities of plastic will still accumulate in the environment.

Science, this issue p. 1515, p. 1455

Abstract

Plastic pollution is a pervasive and growing problem. To estimate the effectiveness of interventions to reduce plastic pollution, we modeled stocks and flows of municipal solid waste and four sources of microplastics through the global plastic system for five scenarios between 2016 and 2040. Implementing all feasible interventions reduced plastic pollution by 40% from 2016 rates and 78% relative to “business as usual” in 2040. Even with immediate and concerted action, 710 million metric tons of plastic waste cumulatively entered aquatic and terrestrial ecosystems. To avoid a massive build-up of plastic in the environment, coordinated global action is urgently needed to reduce plastic consumption; increase rates of reuse, waste collection, and recycling; expand safe disposal systems; and accelerate innovation in the plastic value chain.

Plastic pollution is globally ubiquitous. It is found throughout the oceans, in lakes and rivers, in soils and sediments, in the atmosphere, and in animal biomass. This proliferation has been driven by rapid growth in plastic production and use combined with linear economic models that ignore the externalities of waste (1, 2). A sharp rise in single-use plastic consumption and an expanding “throw-away” culture (1) have exacerbated the problem. Waste management systems do not have sufficient capacity at the global level to safely dispose of or recycle waste plastic (3, 4), resulting in an inevitable increase in plastic pollution into the environment. Previous studies estimated that ~8 million metric tons (Mt) of macroplastic (5) and 1.5 Mt of primary microplastic (6) enter the ocean annually. Comparable estimates for terrestrial plastic pollution have yet to be quantified. If plastic production and waste generation continue to grow at current rates, the annual mass of mismanaged waste has been projected to more than double by 2050 (1, 2), and the cumulative mass of ocean plastic could increase by an order of magnitude from 2010 levels by 2025 (5). Despite the magnitude of these flows, the efficacy and economic costs of solutions proposed to solve the plastic waste problem—the uncontrolled release of plastic waste into the environment resulting from ineffective management—remain unknown.

A growing body of evidence points to a broad range of detrimental effects of plastic pollution. Nearly 700 marine species and more than 50 freshwater species are known to have ingested or become entangled in macroplastic (7, 8), and there is growing evidence that plastic is ingested by a wide range of terrestrial organisms (9). Plastic pollution affects many aspects of human well-being: affecting the aesthetics of beaches (10), blocking drainage and wastewater engineering systems (11), and providing a breeding ground for disease vectors (10, 12). The lower-bound estimate of the economic impact on costs of plastic pollution to fishing, tourism, and shipping have been estimated at $13 billion annually (13). Although harmful effects of microplastic (here defined as plastics <5 mm) have not been consistently demonstrated, ingestion has been documented across trophic levels and at all depths of the ocean, in individual organisms and species assemblages (8, 14) and in terrestrial organisms (15). Microplastics are also increasingly found in the human food system, although their impacts on human health are difficult to assert and require further research (16, 17). Plastic production, collection, and disposal are also major sources of greenhouse gas (GHG) emissions (18).

Cost-effective solutions to managing plastic waste vary considerably across geographies and social settings (3), and a variety of solutions to the plastic pollution problem have been proposed at local, national, and regional levels (19, 20). Some proposed interventions focus on postconsumption management, requiring considerable growth in investment and capacity of waste management solutions (21, 22). Other interventions prioritize reducing plastic through replacement with alternative products, reuse, and the development of new delivery models (23). Individual countries have established bans or levies on select plastic products, with a particular focus on banning single-use carrier bags and microbeads in cosmetic products (24, 25). The European Union recently adopted a directive on single-use plastics (26), and the Basel Convention was amended to regulate the international trade of plastic waste (27). The scientific community and nongovernmental organizations are also working to identify solutions (21, 28). Despite these efforts, a global evidence-based strategy that includes practical and measurable interventions aimed at reducing plastic pollution does not yet exist.

Modeling approach

Designing an effective global strategy requires an understanding of the mitigation potential of different solutions and the magnitude of global effort needed to appreciably reduce plastic pollution. To estimate mitigation potential under different intervention scenarios, we developed the Plastics-to-Ocean (P2O) model. P2O is a data-driven coupled ordinary differential equation (ODE) model that calculates the flow of plastics through representative systems. We used the model to characterize key stocks and flows for land-based sources of plastic pollution across the entire value chain for municipal solid waste (MSW) macroplastics (figs. S1 and S2) and four sources of primary microplastics (those entering the environment as microplastics) [supplementary materials (SM) section 15 and figs. S3 to S6]. Crucially, it provides estimates of plastic waste input into the environment. Costs are calculated as a function of modeled plastic flows, and changes in costs due to production scale and technological advancement are accounted for through learning curves and returns to scale (SM section 16.1).

We calculated projected growth in demand for plastic using country-level population size (29), per capita macroplastic MSW (30, 31), and microplastic-generating product use and loss rates. Per capita waste generation and waste management processes (such as collection costs, collection and processing rates, and recycling recovery value) and rates of primary microplastic generation vary by geography and plastic category or source (6, 3234). To account for these differences, the global population was split across eight geographic archetypes according to World Bank income categories (low income, lower- and upper- middle income, and high income) and United Nations urban-rural classifications (29). Populations were further differentiated by their distance to water (<1 km or >1 km) to estimate their relative flows of plastic pollution to terrestrial versus aquatic (lakes, rivers, and marine environments) systems. To account for different waste management pathways (35) and movement rates of waste in the environment (35), MSW plastics were differentiated into three material categories: rigid monomaterial, flexible monomaterial, and multimaterial or multilayer. Four microplastic sources were modeled: synthetic textiles, tires, plastic pellets, and personal care products.

Five scenarios were developed to estimate reductions in plastic pollution over the period 2016 to 2040. Scenarios were defined by four high-level classes of interventions (reduce, substitute, recycle, and dispose) and eight system interventions: (i) reducing plastic quantity in the system, (ii) substituting plastics with alternative materials and delivery systems, (iii) implementing design for recycling, (iv) increasing collection capacity, (v) scaling up sorting and mechanical recycling capacity, (vi) scaling up chemical conversion capacity, (vii) reducing postcollection environmental leakage, and (viii) reducing trade in plastic waste (table S7). Scenarios modeled include (i) “Business as Usual” (BAU), (ii) “Collect and Dispose,” (iii) “Recycling,” (iv) “Reduce and Substitute,” and (v) an integrated “System Change” scenario that implemented the entire suite of interventions (tables S8 and S57).

At all relevant geographical scales, waste production and handling data are notoriously difficult to obtain. Many model inputs have a high degree of uncertainty, which was propagated with Monte Carlo sampling. Data inputs and assigned uncertainties are described in SM section 5.6. In the absence of datasets with which to formally validate the model, we conducted sensitivity analyses to quantify the influence of individual model inputs and to identify key drivers of plastic pollution. Model outputs from the BAU scenario were also compared with results from other global studies (2, 5, 36).

Business as usual

The BAU scenario highlights the scale of the plastic pollution problem and provides a baseline from which to compare alternative intervention strategies (Fig. 1). At a global scale from 2016 to 2040, the annual rate of macro- and microplastic entering aquatic systems from land increased 2.6-fold (Fig. 1C and Table 1). Over the same period, the rate of plastic pollution retained in terrestrial systems increased 2.8-fold (Fig. 1D and Table 1).

Fig. 1 Annual rates of plastic pollution entering the environment estimated from 300 Monte Carlo simulations.

(A) Time series of plastic pollution entering aquatic and terrestrial ecosystems (million metric tons/year ± 95% CI) by scenario, 2016 to 2040. Scenarios are Business as Usual (BAU), Collect and Dispose scenario (CDS), Recycling scenario (RES), Reduce and Substitute scenario (RSS), and System Change scenario (SCS). Plastic pollution rates for all scenarios between 2016 and 2020 are identical. The black point estimate in 2040 represents the annual rate of plastic pollution assuming that global commitments to reduce plastic use and increase recycling announced before June 2019 are implemented before 2040. A time series for this scenario is not presented because timelines for implementation are unknown. (B) Kernel density estimates for plastic pollution (million metric tons) in 2040 by scenario. (C and D) Boxplots of plastic pollution entering (C) aquatic and (D) terrestrial ecosystems by scenario for beginning, middle, and end years of scenario implementation. Boxplots follow the Tukey convention: Hinges indicate first and third quartiles; whiskers indicate the most extreme value no further than 1.5 times the interquartile range from the hinge; and horizontal lines indicates the median.

Table 1 Summary statistics and comparison of end-of-life fates for MSW plastic under BAU and SCS.

Shown from left to right are plastic mass, percent of total plastic demand under different end-of-life fates for year 2016 and for year 2040 under the Business as Usual (BAU) and System Change scenarios (SCS), and percent change in plastic mass, under different end-of-life fates for SCS in 2040 relative to 2016 and BAU in 2040. Values in square brackets represent the lower and upper bounds of the 95% CI for the values above them. Dashes indicate undefined values whose calculation involves division by zero.

View this table:

When we modeled current commitments to reducing plastic pollution assuming full implementation (SM section 9.1), annual plastic pollution rates into aquatic and terrestrial environments decreased by only 6.6% [95% confidence interval (CI): 5.4, 7.9] and 7.7% [5.2, 10] by 2040, respectively (Fig. 1A) (37). This result confirms that current commitments coupled with appropriate policies can reduce plastic waste input into the environment but also shows that considerable additional effort will be needed to match the unprecedented scale of projected environmental plastic pollution.

Plastic pollution rates were found to be particularly sensitive to total plastic mass, collection rates, and the ratio of managed to mismanaged waste. For example, a 1-ton reduction in plastic MSW mass (through reduce and substitute interventions) decreased aquatic plastic pollution by an average of 0.088 tons in low- and middle-income archetypes and an average of 0.0050 tons in high-income archetypes. Across all archetypes, an equivalent increase in the collection of plastic waste (through formal and informal sectors) resulted in an average 0.18-ton decrease in aquatic plastic pollution, whereas a similar decrease in postcollection mismanaged waste produced an average 0.10-ton decrease in aquatic plastic pollution.

Scenarios to reduce plastic pollution

The focus of plastic pollution reduction strategies can be broadly partitioned into upstream (preconsumption, such as reducing demand) and downstream (postconsumption, such as collection and recycling) measures. To parameterize the development of waste management and recycling solutions in the Collect and Dispose, Recycling, and System Change scenarios, we estimated maximum foreseen growth and implementation rates on the basis of historical trends and expert panel consensus assessment (SM section 1). Compared with BAU, the annual combined terrestrial and aquatic plastic pollution rates were reduced by 57% in 2040 [45, 69] under the Collect and Dispose scenario and by 45% [35, 54] under the Recycling scenario (Fig. 1, A and B).

Strategies focused on upstream (preconsumption) solutions were represented by the Reduce and Substitute scenario. We developed a feasibility assessment framework to model the potential development of upstream solutions aimed at reducing the volume of plastics used and disposed of into the waste stream (SM section 9). We assessed 15 major plastic applications against four criteria for technology readiness and unintended consequences related to health and food safety, consumer acceptance (for example, convenience and climate change impacts), and affordability (tables S21 and S22). We assessed the feasibility of substitution with alternative material against the potential for scaling to meaningful levels within the modeling period. Paper, coated paper, and compostable materials met these criteria. Under the Reduce and Substitute scenario, annual combined terrestrial and aquatic plastic pollution in 2040 decreased 59% [47, 72] relative to BAU, whereas annual plastic production decreased by 47% [44, 49]. Consequently, plastic production in 2040 under the Reduce and Substitute scenario (220 Mt/year [200, 240]) was similar to production in 2016 (210 Mt/year [200, 230]).

Neither pre- nor postconsumption interventions alone are sufficient to address the plastic problem. Combining the maximum foreseen application of pre- and postconsumption solutions represents the most aggressive possible solution given current technology: the System Change scenario. In this scenario, annual combined terrestrial and aquatic plastic pollution decreased by 78% [62, 94] relative to BAU in 2040 but only by 40% [31, 48] relative to 2016 pollution rates (Fig. 1, A and B, and Table 1). In 2040, the annual rate of land-based sources of plastic entering aquatic and terrestrial systems decreased by 82% [68, 95] and 76% [55, 97] relative to BAU, respectively (Fig. 1, C and D, and Table 1).

Under the System Change scenario in 2040, a substantial reduction in mismanaged and disposed waste was achieved through increases in the proportion of plastic demand reduced, substituted by alternative materials, and recycled (Fig. 2A and Table 1). These changes to the plastic system resulted in 11% [10, 12] less virgin plastic being produced in 2040 under the System Change scenario than was produced in 2016, and 55% [51, 58] less than in 2040 under BAU. Moreover, this reduction was driven by increases in recycled plastic feedstock, which have lower life-cycle GHG emissions (18). Taken together, the System Change scenario moves toward achieving a circular economy in which resources are conserved, waste generation is minimized (38), and GHG emissions reduced.

Fig. 2 Fate for all MSW plastic, 2016 to 2040, under the System Change scenario (SCS).

(A) Annual mass of plastic (million metric tons/year) for each of five end-of-life fates. (B) Boxplots showing mass of plastic utility (million metric tons/year) addressed per modeled intervention in 2040, after 20 years of SCS implementation, organized by end-of-life fate. NDM, new delivery model; P2F chemical, plastic-to-fuel chemical conversion; P2P chemical, plastic-to-plastic chemical conversion; Incineration ER, incineration with energy recovery; Aquatic poll., plastic pollution into aquatic systems; Terrestrial poll., plastic pollution into terrestrial systems. Boxplots follow the Tukey convention: Hinges indicate first and third quartiles; whiskers indicate the most extreme value no further than 1.5 times the interquartile range from the hinge; and horizontal lines indicate the median.

The present value of cumulative, global waste management operations from 2016 to 2040 was approximated to assess the relative cost of each scenario (Fig. 3). Among scenarios, costs varied by less than 20% relative to BAU, were lowest under the System Change and Recycling scenarios, and were highest for the Collect and Dispose scenario. Costs under the System Change scenario were 18% [14, 23] lower than BAU, with increased waste management costs offset by costs savings from reduced plastic production and revenues from recyclate sales, which increased because of product redesign and improved economics of recycling (SM section 16.8). These costs represent only waste management costs, which are generally borne by taxpayers. Corporate engagement, through improved product design, alternative material development, and new business models will be necessary to achieve pollution levels observed in the System Change scenario. This engagement will likely require a substantial shift in private sector investment.

Fig. 3 Present value costs for the management (collection, sorting, recycling, and disposal) of plastic MSW by scenario, 2016 to 2040.

Costs (billions 2018 U.S. dollars ± 95% CI) are calculated assuming 3.5% discount rate and are net of revenues associated with the sale of recycled plastic feedstock and electricity generated from plastic incineration with energy recovery. Scenarios are Business as Usual (BAU), Collect and Dispose scenario (CDS), Recycling scenario (RES), Reduce and Substitute scenario (RSS), and System Change scenario (SCS).

Our results underline the urgency with which extensive interventions are needed. Despite a considerable reduction in annual plastic production and an increase in the proportion of MSW that is effectively managed under the best-case System Change scenario, a substantial amount of plastic waste remained mismanaged (not collected and sorted, recycled, or safely disposed) between 2016 and 2040. When implementation of interventions begins in 2020, the cumulative mass of plastic pollution added between 2016 and 2040 amounts to 250 Mt [190, 310] in aquatic systems (Fig. 4A) and 460 Mt [300, 640] in terrestrial systems (Fig. 4B), which are approximately 1 and 2 times the total annual plastic production in 2016, respectively. If implementation of interventions is delayed by only 5 years, an additional 300 Mt of mismanaged plastic waste is expected to accumulate in the environment.

Fig. 4 Cumulative mass of plastic MSW, 2016 to 2040.

(A and B) Cumulative mass of plastic MSW polluting (A) aquatic and (B) terrestrial systems by scenario and plastic type for years 2016 to 2040 (million metric tons ± 95% CI). (C) Cumulative mass of plastic MSW recycled for each of four plastic types modeled. (D) Cumulative mass of noncircular plastic MSW endpoints, including solutions in the mismanaged (dumpsite or open burning), effectively disposed [landfill, incineration with energy recovery, or plastic-to-fuel (P2F) chemical conversion], and recycling (open loop recycling) categories. Uncertainty bars for P2F chemical conversion are not visible because their endpoints do not exceed the radius of the plotted point estimate. Scenarios are Business as Usual (BAU), Collect and Dispose” scenario (CDS), ‘Recycling’ scenario (RES), ‘Reduce and Substitute’ scenario (RSS), and System Change scenario (SCS).

Outlook by plastic category

The complex composition of multimaterial plastics limits the technical feasibility of sorting and reprocessing (39), decreasing the economic attractiveness of recycling. Accordingly, the annual production of these plastics decreased by 19 Mt [18, 20] from 2016 to 2040 under the System Change scenario, with a shift of similar magnitude to flexible monomaterial plastic production (20 Mt/year [19, 21]).

Because of the relative ease of collection and sorting, recycling was dominated by rigid plastics in all archetypes and across all scenarios (Fig. 4C). Under the System Change scenario in 2040, rigid plastics represented 62% [58, 67] of the annual mass of recycling, with a sizeable component of flexible monomaterial plastic (33% [28, 37]) (Fig. 5A). In comparison, only 5.0% [4.2, 5.4] of recycled material was derived from multimaterial or multilayer waste plastic (Fig. 5A).

Fig. 5 Fate of plastic MSW by plastic type under the System Change Scenario (SCS).

(A) Proportion of MSW (± 95% CI) produced in 2040 absorbed by each of three recycling solutions and the dispose and mismanaged end-of-life categories. Even under SCS, few effective solutions are implemented to manage primary microplastics. (B and C) The proportion of plastic pollution (± 95% CI) entering (B) global aquatic and (C) terrestrial systems by plastic type, 2016 to 2040.

The diversity of polymer types, surface contamination, and low density of postconsumer flexible monomaterial limit their capacity for recycling, particularly in geographies where waste collection services are provided by the informal sector. At a global scale, the absolute and relative contribution of flexible monomaterial plastics to environmental pollution grew between 2016 and 2040, from 45% [35, 56] to 56% [40, 73] in aquatic environments and from 37% [18, 52] to 48% [22, 67] in terrestrial environments (Fig. 5, B and C). Accordingly, finding an economically viable solution to effectively manage flexible plastics will be essential for solving the plastic pollution problem.

Similarly, the proportion of total plastic pollution originating from microplastics in the System Change scenario grew from 11% [6.5, 18] to 23% [11, 42] in aquatic systems and from 16% [8.2, 27] to 31% [18, 51] in terrestrial systems over the modeled period (Fig. 5, B and C). Technologies to capture microplastics, which often rely on stormwater and wastewater management and treatment, are rarely economically feasible—even in wealthy regions—because of associated infrastructure costs. This technological challenge is particularly acute for tire particles, which contributed 93% [83, 96] of global microplastic pollution by mass in 2040.

Difficulties to overcome

Scaling collection to all households at a global level is a monumental task that would require connecting over a million additional households to MSW collection services per week from 2020 to 2040; the majority of these unconnected households are in middle-income countries. The effort to increase household waste collection will therefore require a key role for “waste pickers” [the informal collection and recycling sector (40)], who link the service chain (MSW collection) to the value chain (recycling) in low- and middle-income settings. Globally, this sector was responsible for 58% [55, 64] of postconsumer plastic waste collected for recycling in 2016. To incentivize the collection of low-value plastics (flexible monomaterial and multimaterial or multilayer plastic) by the informal sector, the profitability of recycling these materials would need to rise to create demand for their collection. Accordingly, investments in collection infrastructure must be coordinated with improved governance around collection, sorting, and safe management of generated waste (41).

Mismanaged plastic waste (in dumpsites, openly burned, or released into aquatic or terrestrial environments) is associated with a range of risks to human and ecological health (42). Substantial quantities of such waste are likely to continue to be emitted into the environment or openly burned through time. Under the System Change scenario, in addition to aquatic and terrestrial pollution, ~250 Mt [130, 380] of waste plastic would accumulate in open dumpsites from 2016 to 2040 and remain a potential source of environmental pollution (Fig. 4D). Many communities in emerging economies with inadequate waste management services and infrastructure burn waste residentially or in open dumpsites without emissions controls. Open burning transfers the pollution burden to air, water, and land through the generation of GHGs, particulate matter (including microplastic particles), and harmful chemicals such as dioxins and other persistent organic pollutants (43, 44). Despite its human health and environmental consequences, open burning was the single largest component of mismanaged plastic waste under all scenarios, with 1200 Mt [940, 1400] of plastic burned in the System Change scenario between 2016 and 2040 (Fig. 4D). It therefore remains a stubborn pollution and social justice problem in need of an effective solution.

Although not strictly mismanaged, the net export of waste from high-income to upper- and lower-middle income countries grew from 2.7 Mt/year [2.4, 4.7] in 2016 to 3.8 Mt/year [0.7, 7.2] in 2040 under BAU. Although a comparatively small amount, these exports have the potential to increase the fraction of mismanaged plastic waste because receiving countries often have insufficient capacity to manage their own waste. Consequently, importing waste for recycling can have the unintended consequence of displacing these developing economies’ capacity to recycle their domestic waste (45).

Although efforts to measure the amount of plastic pollution entering rivers and oceans have increased in recent years (4648), key data gaps remain. To better estimate the effects of consumer, corporate, and policy actions on solving the plastic pollution problem, additional empirical data are needed throughout the plastics system—particularly in developing economies. Moreover, a more complete accounting of the benefits, costs, and externalities of plastic use is needed to design policies that align social and financial incentives and minimize plastic pollution. These data deficiencies currently prevent application of the model at finer geographical scales and limit the granularity of the system representation. In particular, data from the informal sector of the global waste management system are scarce, as are data that shed light on the importance of postcollection MSW mismanagement. Additional quantitative data are also needed to better understand key sources, rates, and pathways for microplastic pollution and for maritime sources of plastic pollution.

Addressing the plastic pollution problem

Our analysis indicates that urgent and coordinated action combining pre- and postconsumption solutions could reverse the increasing trend of environmental plastic pollution. Although no silver bullet exists, 78% of the plastic pollution problem can be solved by 2040 through the use of current knowledge and technologies and at a lower net cost for waste management systems compared with that of BAU. However, with long degradation times, even a 78% reduction from BAU pollution rates results in a massive accumulation of plastic waste in the environment. Moreover, even if this system change is achieved, plastic production and unsound waste management activities will continue to emit large quantities of GHGs. Further innovation in resource-efficient and low-emission business models, reuse and refill systems, sustainable substitute materials, waste management technologies, and effective government policies are needed. Such innovation could be financed by redirecting existing and future investments in virgin plastic infrastructure. Substantial commitments to improving the global plastic system are required from businesses, governments, and the international community to solve the ecological, social, and economic problems of plastic pollution and achieve near-zero input of plastics into the environment.

Supplementary Materials

References and Notes

  1. J. Boucher, D. Friot, Primary Microplastics in the Oceans: A Global Evaluation of Sources (IUCN, 2017).

  2. United Nations Environment Programme, “Valuing plastics: the business case for measuring, managing and disclosing plastic use in the consumer goods industry” (United Nations, 2014).

  3. Ellen MacArthur Foundation, The New Plastics Economy: Rethinking the Future of Plastics (Ellen MacArthur Foundation, 2016).

  4. European Union, “Directive (EU) 2019/904 of the European Parliament and of the Council of 5 June 2019 on the reduction of the impact of certain plastic products on the environment,” 2019.

  5. United Nations Environment Programme Secretariat of the Basel Convention, “Decision BC-14/13: Further actions to address plastic waste under the Basel Convention” (United Nations, 2018).

  6. United Nations Department of Economic and Social Affairs Population Division, “World Urbanization Prospects: The 2018 Revision (ST/ESA/SER.A/420)” (United Nations, 2019).

  7. S. Kaza, L. Yao, P. Bhada-Tata, F. Van Woerden, What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 (The World Bank, 2018).

  8. OECD, Environment at a Glance 2015: OECD Indicators (OECD Publishing, 2015).

  9. WRAP, “Defining what’s recyclable and best in class polymer choices for packaging” (v1, 2019).

  10. OECD, “Improving markets for recycled plastics” (OECD Publishing, 2018).

  11. Excluding microplastic pollution, the P2O model estimates that 9.8 Mt/year [7.7, 12] of plastic pollution enters aquatic systems in 2016 and 16 Mt/year [12, 20] in 2025. These outputs closely align with ranges reported by Jambeck et al. (5), who report a midpoint of 9.1 Mt/year (25% of mismanaged waste entering the ocean) [5.5 Mt/year for 15%; 14.6 Mt/year for 40%] in 2015 and 17.5 Mt/year [10.5, 28] in 2025. Estimated masses of mismanaged waste reported here (for 2016, 87 Mt [81, 93]; for 2020, 108 Mt [101, 126]) are higher than, but in the same order of magnitude, as those reported by Jambeck et al. (5) (2016, 36.5 Mt; 2020, 69.9 Mt). This is unsurprising because Jambeck et al. (5) do not estimate mismanaged waste generated >50 km from the coast. In early model time steps, estimated mismanaged MSW presented here (2016, 87 Mt [81, 93]; 2020, 108 Mt [101, 126]) align well with those presented by Lebreton and Andrady (2) (2015, 80 Mt [60, 99]; 2020, 96 Mt [75, 115]). Estimates of mismanaged MSW from the two models diverge into the future; we estimated 228 Mt [213, 252] in 2040, whereas Lebreton and Andrady (2) estimated 155 Mt [118, 188]. This divergence may be due to several differences among the models in urban/rural population splits and constraints on waste management and recycling capacities applied in P2O.
  12. Reported results represent model output when inputs are assumed to have no error. 95% CIs were calculated by using Monte Carlo sampling (SM section 5.6). Hereafter, values in square brackets represent the lower and upper bounds of the CI.
  13. M. Crippa et al., A Circular Economy for Plastics—Insights from Research and Innovation to Inform Policy and Funding Decisions (European Commission, 2019).

  14. S. Slater, T. Crichton, Recycling of Laminated Packaging (Banbury, 2011).

  15. D. Hoornweg, P. Bhada-Tata, What a waste: A global review of solid waste management (Urban Development & Local Government Unit, The World Bank, 2012).

  16. The World Bank, World Bank country and lending groups (World Bank, 2019).

  17. Center for International Earth Science Information Network–CIESIN–Columbia University, Gridded population of the world, version 4 (GPWv4): population count adjusted to Match 2015 revision of UN WPP country totals, revision 11 (NASA Socioeconomic Data and Applications Center, 2018).

  18. S. Hann, C. Sherrington, O. Jamieson, M. Hickman, A. Bapasola, Investigating Options for Reducing Releases in the Aquatic Environment of Microplastics Emitted By (But Not Intentionally Added In) Products (Eunomia, 2018).

  19. S. Kaza, L. Yao, P. Bhada-Tata, F. Van Woerden, Country-level dataset. What a Waste 2.0 (2018).

  20. G. Hanke, “Marine beach litter in Europe—Top items,” European Commisson JRC Technical Reports (Ispra, 2016).

  21. Kashtakari Panchayat, Waste Ventures, “Waste survey data of households across a cross-section of income levels in Pune, India” (2015).

  22. “Waste composition data collected from 300 households and 10 businesses in Cat Ba and Ha Long, Vietnam” (2018).

  23. K. Khan, F. Alam, H. Chowdhury, “Impact of climate change on power plants in Bangladesh,” in Proceedings of the International Conference on Mechanical Engineering 2011, P. M. Ali, Ed. (Dhaka, 2011), vol. 1, pp. 1–6.

  24. European Commission, “Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain directives” (European Commission, 2008).

  25. A. Bagchi, Design for Landfills and Integrated Solid Waste Management (Wiley, ed. 3, 2004).

  26. M. W. Ryberg, A. Laurent, M. Hauschild, Mapping of Global Plastics Value Chain and Plastics Losses to the Environment: With a Particular Focus on Marine Environment (United Nations Environment Programme, 2018).

  27. Budan Pasat Statistik, Indikator perilaku peduli lingkungan hidup [2014 environmental care behavior indicators] (Budan Pasat Statistik, 2015).

  28. GESAMP, Sources, Fate and Effects of Microplastics in the Marine Environment: Part Two of a Global Assessment (International Maritime Organization, 2016).

  29. C. Sherrington, Plastics in the Marine Environment (Eunomia, 2016).

  30. A. R. Essel R, Engel L, Carus M, Sources of Microplastics Relevant to Marine Protection in Germany (Umwelt Bundesamt, 2015).

  31. K. Magnusson et al., Swedish sources and pathways for microplastics to the marine environment. A review of existing data. IVL Sven. miljöinstitutet 183, 1–89 (2016).

  32. W. P. Albertone, S. Allen, A. Redpath, H. Strandell, Eds., “Globalization patterns in EU trade and investments 2017 edition” (Eurostat, European Union, 2017); .doi:10.2785/65836

  33. Textile Exchange, “Prefered fiber & materials, Market report 2018” (2018).

  34. G. Heal, Valuing the Future: Economic Theory and Sustainability, Economics for a Sustainable Earth Series (Columbia Univ. Press, 2000).

  35. WRAP Cymru, Eunomia Research and Consulting, WRAP Cymru, Kerbside Collections Options: Wales (Cardiff, 2011).

  36. A. J. Dubanowitz, thesis, Columbia University. (2000).

  37. T. Elliott, L. Elliott, A Plastic Future: Plastic Consumption and Waste Management in the UK (WWF, 2018).

  38. DEFRA, “Consultation stage impact assessment on the proposal to ban the distribution and/or sale of plastic drinking straws in England” (DEFRA, 2018).

  39. A. Nonclercq, thesis, Delft University of Technology (2016).

  40. M. Fernandez, Waste-to-Energy in China: Perspectives (BioEnergy Consult, 2018).

  41. D. Silvestro, G. Gilelen, in European TRWP Platform—2nd Technical Meeting. (2019).

  42. Philippine Paper Manufacturer’s Association, The Use of Paper and Measures to Improve Its Recycling Rate in the Philippines (Philippine Paper Manufacturer’s Association, 2017).

  43. Consumer Goods Forum, Blueprint for Packaging Waste Management: An FMCG View (Consumer Goods Forum, 2019).

Acknowledgments: We thank the anonymous peer reviewers for their suggestions, which improved this manuscript. M. Hestin, L. Peake, G. Keoleian, J. Abbot, J. Muncke, and D. Mihaylova reviewed drafts of the supplementary materials and results. We are indebted to nonauthoring members of the expert panel—D. Russo, E. Moss, J. Boughton, C. Lao, D. Lerario, M. Gadgil, and M. Da—for contributing their knowledge and sharing data with this research. We are also indebted to A. Morlet, R. Opsomer, S. Defruyt, and S. Wingstrand from the Ellen MacArthur Foundation for substantial contribution on knowledge and data on the plastic system and circular economy. We are grateful to J. Calcagno, J. Mandirola, J. Sirko, M. Freeman, Z. Celik, H. Watson, G. Murphy, B. Towner Levine, M. Mahoney, E. Hogan, M. Wissner, L. Mudge, A. Valdivia, O. Tzadik, M. Ochocki, and B. Frinault for conducting accuracy checks of raw data inputs, the assembly of model input files, code review, and fact checks of the supplementary materials. We also thank I. Issifu and B. Frinault for reviewing manuscript drafts, C. Gonzales and A. Syed for help with data collection and curation, and P. Edwards for managing an informal review process. K. Gronsky assisted in the design of the research and provided project management support. R.-M. Paquin assisted in formatting figures and references. SYSTEMIQ provided generous in-kind support to this research. Funding: This project was funded by The Pew Charitable Trusts. Author contributions: W.W.Y.L., J.E.P., Y.S., and M.R.S. conceived the study and led the overall conceptual development of this work. This research represents the equal effort and intellectual contribution among research groups at four key institutions: The Pew Charitable Trusts, SYSTEMIQ, University of Oxford, and University of Leeds, led respectively by W.W.Y.L., Y.S., R.M.B., and C.A.V. The P2O model was developed by R.M.B., and R.M.B. ran all model simulations. J.E.P. and R.M.B. processed model outputs. C.A.V. and E.C. provided thought leadership and expertise on solid waste management systems and practices. E.K. was a key contributor to the recycling scenarios, especially their economics and sensitivities in future changes. J.K., A.C.C., E.F., and S.B. provided the expertise in reduce and substitute interventions to select material innovations and new delivery models as well as to assess their applicability across scenarios. J.E.P. prepared the figures. Y.S., J.K., E.C., E.J., L.K., M.E.A., M.M.P., T.D.P., and D.F. collected and curated the data. Working groups were led by J.K., E.C., M.E.A., D.F., and E.J. Manuscript drafting was led by W.W.Y.L., with substantial review and editing support from J.E.P., R.M.B., M.B.M., L.G., B.D., E.C., and C.A.V, with further input from all authors. Technical appendices were prepared by W.W.Y.L., Y.S., R.M.B., E.C., J.K., C.A.V., M.B.M., E.J., K.K.H., M.M.P., K.L., and J.E.P., coordinated by K.K.H. Data-checking of the model data inputs, including associated software development, was conducted by E.N. and managed by M.B.M. Competing interests: None declared. Data and materials availability: The Matlab code and input files used to run the P2O model and generate the results of this study and the resulting output files are available at (49).

Source

Continue Reading
Advertisement
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Science

Too bright to breed

Published

on

Night light from coastal cities overpowers natural signals for coral spawning from neighboring reefs.

PHOTO: NOKURO/ALAMY STOCK PHOTO

Most coral species reproduce through broadcast spawning. For such a strategy to be successful, coordination has had to evolve such that gametes across clones are released simultaneously. Over millennia, lunar cycles have facilitated this coordination, but the recent development of bright artificial light has led to an overpowering of these natural signals. Ayalon et al. tested for the direct impact of different kinds of artificial light on different species of corals. The authors found that multiple lighting types, including cold and warm light-emitting diode (LED) lamps, led to loss of synchrony and spawning failure. Further, coastal maps of artificial lighting globally suggest that it threatens to interfere with coral reproduction worldwide and that the deployment of LED lights, the blue light of which penetrates deeper into the water column, is likely to make the situation even worse.

Curr. Biol. 10.1016/j.cub.2020.10.039 (2020).

Source

Continue Reading

Science

SpaceX launches Starlink app and provides pricing and service info to early beta testers

Published

on

SpaceX has debuted an official app for its Starlink satellite broadband internet service, for both iOS and Android devices. The Starlink app allows users to manage their connection – but to take part you’ll have to be part of the official beta program, and the initial public rollout of that is only just about to begin, according to emails SpaceX sent to potential beta testers this week.

The Starlink app provides guidance on how to install the Starlink receiver dish, as well as connection status (including signal quality), a device overview for seeing what’s connected to your network, and a speed test tool. It’s similar to other mobile apps for managing home wifi connections and routers. Meanwhile, the emails to potential testers that CNBC obtained detail what users can expect in terms of pricing, speeds and latency.

The initial Starlink public beta test is called the “Better than Nothing Beta Program,” SpaceX confirms in their app description, and will be rolled out across the U.S. and Canada before the end of the year – which matches up with earlier stated timelines. As per the name, SpaceX is hoping to set expectations for early customers, with speeds users can expect ranging from between 50Mb/s to 150Mb/s, and latency of 20ms to 40ms according to the customer emails, with some periods including no connectivity at all. Even with expectations set low, if those values prove accurate, it should be a big improvement for users in some hard-to-reach areas where service is currently costly, unreliable and operating at roughly dial-up equivalent speeds.

Image Credits: SpaceX

In terms of pricing, SpaceX says in the emails that the cost for participants in this beta program will be $99 per moth, plus a one-time cost of $499 initially to pay for the hardware, which includes the mounting kit and receiver dish, as well as a router with wifi networking capabilities.

The goal eventually is offer reliably, low-latency broadband that provides consistent connection by handing off connectivity between a large constellation of small satellites circling the globe in low Earth orbit. Already, SpaceX has nearly 1,000 of those launched, but it hopes to launch many thousands more before it reaches global coverage and offers general availability of its services.

SpaceX has already announced some initial commercial partnerships and pilot programs for Starlink, too, including a team-up with Microsoft to connect that company’s mobile Azure data centers, and a project with an East Texas school board to connect the local community.

Source

Continue Reading

Science

Erratum for the Report “Meta-analysis reveals declines in terrestrial but increases in freshwater insect abundances” by R. Van Klink, D. E. Bowler, K. B. Gongalsky, A. B. Swengel, A. Gentile, J. M. Chase

Published

on

S. Rennie, J. Adamson, R. Anderson, C. Andrews, J. Bater, N. Bayfield, K. Beaton, D. Beaumont, S. Benham, V. Bowmaker, C. Britt, R. Brooker, D. Brooks, J. Brunt, G. Common, R. Cooper, S. Corbett, N. Critchley, P. Dennis, J. Dick, B. Dodd, N. Dodd, N. Donovan, J. Easter, M. Flexen, A. Gardiner, D. Hamilton, P. Hargreaves, M. Hatton-Ellis, M. Howe, J. Kahl, M. Lane, S. Langan, D. Lloyd, B. McCarney, Y. McElarney, C. McKenna, S. McMillan, F. Milne, L. Milne, M. Morecroft, M. Murphy, A. Nelson, H. Nicholson, D. Pallett, D. Parry, I. Pearce, G. Pozsgai, A. Riley, R. Rose, S. Schafer, T. Scott, L. Sherrin, C. Shortall, R. Smith, P. Smith, R. Tait, C. Taylor, M. Taylor, M. Thurlow, A. Turner, K. Tyson, H. Watson, M. Whittaker, I. Woiwod, C. Wood, UK Environmental Change Network (ECN) Moth Data: 1992-2015, NERC Environmental Information Data Centre (2018); .

Source

Continue Reading

Trending